atmel sam4n entry point to the atmel arm cortex-m4-based flash mcu portfolio the atmel ? sam4n series comprises the entry point to our portfolio of arm ? cortex ? -m4-based flash microcontrollers (mcus). these mcus feature a 100mhz operating frequency and offer up to 1mb of flash, multiple serial communication peripherals, and analog capability. this combination of features plus low power consumptionmakes the sam4n series ideal for a wide range of applications in industrial automation, consumer and appliance, and energy metering markets. the sam4n series offers pin-to-pin compatibility with atmel sam4s, sam3s, sam3n and sam7s devices, facilitating easy migration within the portfolio. key features ? high level of integration sam4n devices offer fast serial communication with seven uarts, four spis and three i 2 cs. additional features include 12-bit adc, 10-bit dac, integrated voltage reference, multiple timers, pwm and more. ? low power consumption with its low-power architecture, the sam4n mcu achieves power consumption levels down to 170a/mhz in active mode; as low as 20a in sleep mode with full ram retention and wake-up time down to 10s; requiring as little as 1a in backup mode with the rtc running. ? ease of use the ecosystem of software tools and support for the atmel studio 6 integrated development platform (idp) enables an efficient design process and reduces time to market. key applications ? industrial automation and m2m (machine-to-machine) ? process transmitters ? rf modules ? asset tracking ? consumer and appliance ? toys and mobile accessories ? energy metering ? smart meters ? low-end data concentrators ? building and home control ? sensors and actuators ? control panels ? room control units ? keypads ? low-cost gateways(wan/han) (wireless- and home-area-network)
atmel sam4n entry point to the atmel arm cortex-m4-based flash mcu portfolio design tools and ecosystem atmel offers a full suite of hardware tools for evaluation and prototyping with the sam4n series. all sam4n evaluation tools are supported by the atmel studio 6 idp and integrated atmel qtouch ? library support for buttons, sliders and wheels. they are backed by a worldwide support ecosystem of industry-leading suppliers of development tools, real-time operating systems, and middleware products to make your design process easier and reduce time-to-market. sam4n xplained pro the atmel xplained pro platform consists of a main board with multiple expansion ports plus extension boards, including oled lcd displays, buttons, sensors and more. the board is available as a standalone kit. the extension boards can also be purchased separately. sam4n ordering information device name flash(kbytes) sram(kbytes) green packages asamnaf fga asamna fga asamnaa fp asamnaa fp asamnam fn asamnaf fga asamna fga asamnaa fp asamnaa fp asamnam fn asamnaaa fp asamnaam fn ? 2013 atmel corporation. / rev.: atmel-45045a-sam4n_e_us_062013 atmel ? , atmel logo and combinations thereof, and others are registered trademarks or trademarks of atmel corporation or its subsidiaries. arm ? , armpowered ? logo and others are the registered trademarks or trademarks of arm ltd. other terms and product names may be the trademarks of others. disclaimer: the information in this document is provided in connection with atmel products. no license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of atmel products. except as set forth in the atmel terms and conditions of sales located on the atmel website, atmel assumes no liabili ty whatsoever and disclaims any express, implied or statutory warranty relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or non-infringement. in no event shall atmel be liable for any direct, indirect, consequential, punitive, special or incidental damages (including, without limitation, damages for loss and profits, business interruption, or loss of information) arising out of the use or inability to use this document, even if atmel has been advised of the possibility of such damages. atmel makes no representations or warr anties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. atmel does not make any commitmen t to update the information contained herein. unless specifically provided otherwise, atmel products are not suitable for, and shall not be used in, automotive applications. atmel products are not intended, authorized, or warranted for use as compone nts in applications intended to support or sustain life. atmel corporation 1600 technology drive, san jose, ca 95110 usa t : (+1)(408) 441. 0311 f : (+1)(408) 436. 4200 | www.atmel.com
|
